The new Big Joe PDSR, 3000lb Pantograph Walkie Reach Truck.

NEW PRODUCT:  Big Joe J2 Low Level Order Picker:

……………..PRODUCT INFORMATION SECTION…………………

 J1 “Joey” TSV Task Support Vehicle: 

Click photo for specification sheets                

J1 (JOEY) Task Support Vehicle combines attributes of elevating work platforms, order pickers and tuggers in a compact and capable vehicle design.

Developed as an alternative to rolling ladders or other larger equipment, the Joey can support tasks from general overhead maintenance to order picking.  The Joey can elevate an operator up to 190 inches from the floor, turn around in as little as 72 inches, and can be driven at FULL height to move from task to task.  Travel is provided by a high efficiency AC drive motor that can be programmed through the onboard LCD dash, while power comes from a 224AH AGM maintenance free battery pack that supports opportunity charging from standard 120v outlets.

Standard features include electronic power steering, hide-away rear work tray, front & rear flashing lights, and battery compartment rollers. Optional features include anchor with tether & harness, high speed travel, tow hitch, larger front work platform,  and 224ah AGM battery pack with on-board 110 Volt charger (allows unit to be plugged into any standard 110/120 Volt wall outlet).

 (click photo for specification sheets)   and   CHECK out the JOEY J1 video below 

;

Back to top

  J2 “Joey” Low Level Order Picker:

The J2 “JOEY” Low Level Order Picker combines the compact design and exceptional maneuverability of the J1 Task Support Vehicle with the attributes of a counterbalanced forklift; resulting in a versatile machine that can be used for low level order picking and the staging of pallets.

Utilizing many of the same reliable components as the J1, the J2 features a mini-mast than can handle up to 1,500 pounds with lift heights up to 72″.  With a 300lb capacity operator’s compartment and a 200lb capacity rear load tray, the J2 Joey offers up to a 2,000 pound total vehicle capacity with travel speeds up to 4.8 MPH.

The J2 Joey can elevate an operator up to 48 inches from the floor, turn around in as little as 100.4 inches, and can be driven at FULL height to move from task to task.  Travel is provided by a high efficiency AC drive motor and power comes from a 224AH AGM maintenance free battery pack that supports opportunity charging from standard 120v outlets.

Standard features include mini-mast with 36″ long forks, non-marking tires, rear flashing light, and battery compartment rollers. Optional features include forward controls (that eliminate the side guardrails), 12Volt accessory power adapter, and 224ah AGM battery pack with on-board 110 Volt charger (allows unit to be plugged into any standard 110/120 Volt wall outlet).

(click photo for specification sheets)   and   CHECK out the JOEY J2 video below 

Back to top

 Electric 3-Wheel Forklifts:  (1500lbs to 4000lbs)

The Big Joe V-Series three wheel electric counterbalanced forklifts provide exceptional performance and low cost of operation.  The 1500lb capacity V08 comes with a 24Volt ZAPI control system, 157″ 3-stage mast, hydraulic sideshifter, non-marking tires and ergonomic operators compartment.

V08  (24Volt, 1500lb capacity)     

  Click photos for specification sheets        

The V15, V18, and V20 models come standard with 48Volt AC ZAPI control system, a 3stage mast (either 177″ or a 188″) with hydraulic sideshifter, SOLID pneumatic tires, full light package (including headlights, taillights, signal lights, and strobe light), 48 Volt industrial battery and 48 Volt charger.                         

V15 (2800lb capacity)     V18 (3500lb capacity)        V20 (4000lb capacity)

Back to top

Manual Pallet Jacks:

P50: 5000lb capacity Pallet Truck: 27″ x 48″ forks standard

Our 5000lb capacity hand pallet truck is great for moving loads at ground level and its 2.9″ lowered height works with virtually any pallet.  The ergonomic handle provides comfortable and efficient operation, a 210 degree steering arc provides excellent maneuverability and variable speed lowering helps reduce product damage.

Available in 27″ widths with fork lengths of 36″, 42″ and the standard length of 48″

These units are also available in 21″ widths with fork lengths of 36″ and 42″.  (Some sizes are special order).

(click photo for specification sheets)

Back to top

Manual Straddle Stacker:

M22: 2200lb capacity Push-around, electric lift straddle stacker

The M22 is an economical choice for a variety of basic material handling needs.  The stacker features a 2200lb capacity (at 24″ LC), 12 volt electrical power with built-in battery pack & charger, spring loaded steer handle with tracking caster wheels, foot actuated floor lock, adjustable fork carriage, caster foot guard and Key switch.

Available with maximum lift heights of 63″, 98″ and 118″.  Units come standard with 42″ x 1.5″ x 4″ pallet forks.

(click photo for specification sheets)

Back to top

Electric Pallet Trucks:  

SCROLL DOWN for the WPT45, D40, and E30

Our Big Joe Electric Pallet trucks provide a level of economy and performance that make them the best value in the industry.  All three models: WPT45, D40, and E30 come standard with maintenance-free battery packs and built-in 110VAC chargers.  The WPT45 can also be upgraded to an industrial battery.

WPT45 Electric Pallet Truck:                                                     

(click photo for specification sheets)            

The WPT45 was designed to provide smooth fast operation while keeping maintenance costs low.                                 

D40 Electric Pallet Truck:                                                    

(click photo for specification sheets)            

The D40 was designed from the ground up to meet the unique demands of local delivery applications.  Compact in design, it has the power to perform from warehouse to store.

E30 Electric Pallet Truck:                                                    

 (click photo for specification sheets)            

The E30 provides a level of economy and performance that make it one of the best values in the industry.

If you’re looking to upgrade your manual hand pallet jacks to a FULLY electric model to reduce operator strain and improve productivity, the E30 is the perfect choice.

Back to top

Electric Walkie Rider:

Our Big Joe 6000lb capacity AC rider pallet truck has been designed to provide high productivity, reliability, and low operating cost.  Powered by a large AC drive motor that can propel this unit to 9MPH, the WRT60 allows the operator to move product per hour, while delivering exceptional value.

WRT60:  6000lb capacity, 24Volt ZAPI AC controller

Forks: 27″ x 48″ forks standard (other fork sizes available)

(click photo for specification sheets)              SEE VIDEO BELOW 

Back to top

Manual Walkie Straddle Stackers:

1000lb to 2500lb capacity:      SEE VIDEO BELOW 

IBH: The “In Between Handling” straddle stackers.  A great choice for work positioning, transport, and storage duties where powered lift is all you need.  These units are available in lift capacities of 1000 to 2500lbs (see below for load centers).  Each unit is powered by a 125AH battery pack and 8amp built-in 110VAC charger.  Shaft type forks allow quick and easy adjustment. 

18″ Load Centers:  (Click the model numbers below for specification sheets)

IBH1018: 1000 lbs capacity at 18″ Load Center       IBH1518: 1500 lbs capacity at 18″ Load Center

                                        IBH2018: 2000 lbs capacity at 18″ Load Center

24″ Load Centers:  (Click the model numbers below for specification sheets)

IBH1524: 1500 lbs capacity at 24″ Load Center      IBH2024: 2000 lbs capacity at 24″ Load Center

                                        IBH2524: 2500 lbs capacity at 24″ Load Center

Back to top

Electric Walkie Straddle Stackers:

2000lb capacity: PDI: 2000lb capacity, 24Volt Curtis controller

Powered Drive & Lift     SEE VIDEO BELOW 

The Big Joe PDI straddle stackers can accomplish a wide variety of material handling and work positioning tasks.  They provide an economical alternative to sit-down forklifts and can operate in very tight environments. 

(click photo for specification sheets)

 (60″ to 144″ lift heights available)

  Back to top

2200lb capacity: 

S22: 2200lb capacity, 24Volt Curtis controller

Powered Drive & Lift

The new Big Joe S22 eStacker is a good choice for general material handling, stacking and work positioning.  These units offer 24Volt Curtis transistor control, adjustable straddles, and come standard with a maintenance-free battery pack and built-in 110VAC charger.                                  SEE VIDEO BELOW 

                                 &nbnbsp; (click photos for specification sheets)  

S22-62                               S22-62R (fork over)                    S22-98 & S22-116

(Lift height to 62″)                  (Lift height to 62″)                         (98″ and 116″ Lift heights)

Back to top

2500lb capacity:    SEE VIDEO BELOW 

PDS25: 2500lb capacity, 24Volt ZAPI AC controller

Powered Drive & Lift, adjustable straddle legs (in 4″ increments)

The PDS25 is an excellent choice for general material handling, stacking and work positioning in tight areas.  This unit comes standard with a 224AH maintenance-free battery pack with built-in 110VAC charger.  The battery can be upgraded to an industrial battery.

(click photo for specification sheets)

 (106″ to 157″ lift height available)

Back to Top

 3000lb capacity:    SEE VIDEO BELOW 

PDS30: 3000lb capacity, 24Volt ZAPI AC controller

Powered Drive & Lift, adjustable straddle legs (in 4″ increments)

The PDS30 is an excellent choice for warehouse operations and other environments where space is limited. This unit comes standard with a 224AH maintenance-free battery pack with built-in 110VAC charger. The battery can be upgraded to an industrial battery.

(click photo for specification sheets)

 (104″ to 177″ lift height available)

Back to Top

 4000lb capacity:     SEE VIDEO BELOW 

PDS40: 4000lb capacity, 24Volt ZAPI AC controller

Powered Drive & Lift, fixed straddle legs

The PDS40 is an excellent choice for warehouse operations and other environments where space is limited and higher lift capacity is required. This unit comes standard with a 224AH maintenance-free battery pack with built-in 110VAC charger. The battery can be upgraded to an industrial battery.

(click photo for specification sheets)

 (104″ to 177″ lift height available)

Back to top

 Electric Walkie Counterbalanced Stackers:

2200lb & 3300lb capacity:      

CB22: 2200lb capacity, 24Volt ZAPI AC controller

CB33: 3300lb capacity, 24Volt ZAPI AC controller

Powered Drive & Lift                            SEE VIDEO BELOW 

The new Big Joe CB22 and CB33 are an excellent priced alternatives to a sit-down forklift.  These units come with a high torque AC drive motor, feature lift, lower & tilt buttons in the ergonomic handle, and come standard with a maintenance-free battery pack and built-in 110VAC charger.

                                     (click photos for specification sheets)

Back to top

 PDC Counter Balanced Walkie Forklifts     SEE VIDEO BELOW 

The PDC Series forklifts are the walkie alternatives to 2500lb to 4000lb sit-down forklifts. These walkie forklifts can do the job of a rider for less.  Since these trucks don’t have to straddle loads, they can easily handle a wide range of load sizes and can load & unload trailers.  Units can be custom tailored to our requirements.  Powered drive & powered lift.

PDC25: (2500lb capacity)    PDC30: (3000lb capacity)   PDC40: (4000lb capacity)  

Back to top

 Electric Walkie REACH Trucks:

Big Joe’s PDR forklifts are available in 2000lb & 3000lb capacity.  The walk behind (walkie) straddle REACH TRUCKS have the ability to right angle stack a standard 40″ x 48″ pallet in as little as a 84″ aisle.

PDR20: (2000lb capacity)          PDR30: (3000lb capacity)

Back to top

3000lb capacity:

PDSR30: 3000lb capacity, 24Volt with ZAPI AC control system

The PDSR30 combines the tight turning characteristics and low operating costs of a Walkie straddle stacker with the flexibility of a counterbalanced truck through the use of a pantograph; this mechanism extends the loads being handled beyond the straddle legs to lift or lower products, and can be retracted for compact turns.  Standard features include power steering, proportional hydraulics, tilt, regenerative neutral braking, low battery interrupt, hour meter, BDI, and Key Switch.  Powered by either a 224AH maintenance free battery pack or an industrial wet cell battery, this machine has been designed to perform.           CHECK out the PDSR video below 

 (106″, 126″ or 157″ lift heights)

Back to top

 Electric Walkie Order Pickers:

OP20: With Operator’s Compartment, 148″ Platform height, 24Volt Curtis system

Powered Drive & Lift    (click photo for specification sheets)

(148″ maximum platform height)

Back to top

 OP30: With Open Platform, 152″ Platform height, 24Volt Curtis system

Powered Drive & Lift    (click photo for specification sheets)

  (152″ maximum platform height)

Back to top

Dealer Information:

We are actively looking for new dealers in New York State. If your firm is interested in becoming a Big Joe dealer, please fill out our contact form .

Informative Service Bulletins:

IF-001: (June 6, 2012) Products covered:  E-30 & EZ-30 – Subject: Handle Arm set screw

IF-002: (June 7, 2012) Products covered: E-30 & EZ-30 – Subject: Handle Joint Bracket screws

Quick Tip Bulletins:

QT-001: (March 26, 2012) Products covered: E-30 & EZ-30 – Subject: Trouble shooting Intermittent shutdown

QT-002: (June 11, 2012) Products covered: E-30 & EZ-30 – Subject: Trouble shooting Loss of Travel in Forward or Reverse

QT-003: (June 14, 2012) Products covered: E-30 & EZ-30 – Subject: Tightening or removing RED Emergency Stop Switch

Dealer Forms:

Big Joe Formal Warranty Certificate

Big Joe Warranty Reference sheet

WARRANTY Registration & Claim forms:

NOTE: equipment must be registered upon sale to a customer.  NO warranty claim can be filed unless the equipment has been properly registered as per our warranty procedures (Item#1 below). 

(1) Alden / Big Joe warranty submission procedures: (October 15, 2012)

(2a) Big Joe warranty registration form: (October 3, 2012) – to be submitted to our firm via bjwarranties@aldenequipment.com

(2b) Special Big Joe “Joey” J1 warranty registration form (June 3, 2014) – to be submitted to our firm via bjwarranties@aldenequipment.com

(3) Big Joe stock truck inspection report: (April 4, 2012) – to be submitted to our firm via bjwarranties@aldenequipment.com

(4) Big Joe warranty policy & procedure manual: (April 4, 2012) 

(5) Big Joe warranty Flat rate information & form: (April 4, 2012)

(6) Big Joe warranty Flat rate Manual: (April 4, 2012)

(7) Big Joe warranty CLAIM FORM: (Revised October 14, 2015 – this is a LARGE EXCELL file) –  to be submitted directly to Alden via our email (bjwarranties@aldenequipment.com).  NOTE: On the claim form, you MUST include “/ALDEN” after your company’s name in the DEALER NAME box. Alden will submit the completed warranty claim to Big Lift on the dealer’s behalf.

Back to top of Page

Operator Manuals:  (click manual name to download)

Below are Operation Manuals for the most popular Big Joe models.

Please contact us if you need a manual for a machine not listed: (Contact us)

Walkie Pallet Trucks:

– Electric Walkie Pallet Truck Operator Manual (E30, WPT45, WRT60)

– WRT60 Operation & Repair Manual (large file)

Walkie Straddle Stackers:

– S22 Operation & Repair Manual (large file)

– PDS20/25 Operation & Repair Manual (large file)

– PDS30/40 Operation & Repair Manual (large file)

Walkie Counterbalanced forklifts:

– CB22 Operation & Repair Manual (large file)

Electric ride-on forklifts:

– V Series Operation & Repair Manual (large file)

Back to top of Page